Underwater, you should definitely use a wide angle lens. To avoid this, you can spit out the canopy or even grate a potato first! If it does then you will have droplets on the lens. One thing to keep in mind when taking these shots is to try not to get the top of the door wet. Check which one you have before you take it on your dive, because if you have a surface canopy it will leak during your dive and not allow you to continue taking good photos. Some of these domes are just for that, half and half images, and some can also be used underwater. By placing your lens at the waterline, you get an image that shows both above and below the water. This is so fun! It is not necessary, but you will get good shots.
Taking a great half shot (or “split shot”) is easy, but it does involve investing in a canopy that removes water from the lens, thereby increasing the field of view. Also, because we have different filters depending on how deep we go, if you start with a red filter for 10 meters and then go down to 20 meters and want to change the lens, you can do it underwater. That’s why we prefer to do this on the surface.
#Fisheye for iphone install
Just make sure there are no trapped air bubbles when you install your filter. You can adjust it before your dive or during your dive. For example, you want a red filter on blue water, but a magenta one on green water. A red lens often makes your underwater shots look better.īut it will depend on how deep you dive and where for the exact color filter. However, we can replace them with additional filters! Otherwise, your colors will look washed out or unnaturally painted.
Here is the list of the best tips for underwater photography Use filters to correct colorĪs a diver you should know that we are starting to lose color as we go deeper, especially the reds and magentas.
0 kommentar(er)
